Classic Cool Black Hoodie Mens - Protagonist
Cool Black Hoodie Mens - Protagonist
Protagonist Classic Black Hoodie Mens is designed for those who choose to face the world wearing a brave front. Wear it with confidence and you'll be ready for anything the world throws your way! This is our classic black hoodie for men.
It's made with 50% pre-shrunk cotton and 50% polyester, so it's sure to last you through all the exciting twists and turns in your story. You can wear it anywhere with total confidence. Wear this piece of clothing with confidence, knowing that every time you put it on you're reminding yourself to be brave, to take initiative, and to strive for greatness!
This comfy clothing is your BFF to show off your confidence, lightweight with a modern fit, hood and a kangaroo pocket is a way to go.
Product Specification - black hoodie men:
• 50% pre-shrunk cotton, 50% polyester
• Fabric weight: 8.0 oz/yd² (271.25 g/m²)
• Air-jet spun yarn with a soft feel and reduced pilling
• Double-lined hood with matching drawcord
• Quarter-turned body to avoid crease down the middle
• 1 × 1 athletic rib-knit cuffs and waistband with spandex
• Front pouch pocket
• Double-needle stitched collar, shoulders, armholes, cuffs, and hem
Blank product is sourced from Honduras, Mexico, or Nicaragua. Gildan offers fashion basics in a wide variety of styles and colors. The brand is known for its Genuine Responsibility® program which focuses on producing garments using renewable energy and less water than the industry average.
Place the end of a measuring tape beside the collar at the top of the garment (high point shoulder). Pull the tape to the bottom of the item.
Measure yourself around the fullest part of your chest. Keep the measuring tape horizontal.
C Sleeve length
Place the end of a measuring tape at the center back of the collar, then pull the tape along the top seam of the sleeve. When you get to the shoulder hold the tape in place at the shoulder and continue to pull down the sleeve until you reach the hem of the sleeve.
Measurements are provided by suppliers. Product measurements may vary by up to 2" (5 cm).
Sustainability at Madsbay
Sustainability at Madsbay
This product is made especially for you as soon as you place an order, which is why it takes us a bit longer to deliver it to you. Making products on demand instead of in bulk helps reduce overproduction, so thank you for making thoughtful purchasing decisions!
Printed apparel (direct-to-garment)
We use the latest direct-to-garment (DTG) printing technology to offer a wide variety of printable garments and design color options. We use high-quality inks that won’t fade for a long time if taken care of properly.
Keep in mind that the original manufacturer’s care instructions don’t take into consideration the DTG printing process. So we suggest following the care instructions on this page to learn how to take care of your printed garments properly.
Printed apparel can be machine-washed cold, inside-out on a gentle cycle with a mild detergent and like colors. Use non-chlorine bleach only when necessary. You shouldn’t use any fabric softeners or dry-clean the items.
DTG-printed apparel can be tumble-dried on a low cycle, but hang-dry works best. When it comes to ironing, use cool iron inside-out. Don’t iron the print.
Follow these instructions carefully to avoid fading and cracking of the print, and shrinking the garment that can occur if you wash or dry it on a high setting.
Embroidered apparel can be machine-washed cold, inside-out on a gentle cycle with a mild detergent and like colors. You can use a small amount of chlorine bleach, but non-chlorine is the safer option.
If you notice any color residue in water, rinse the garment in lukewarm water and then in cold several times, but try not to rub any stained embroidery. Embroidered clothing can also be dry-cleaned.
After washing, don’t leave the clothing to soak or lie in a pile while wet. Don’t wring out the embroidered items, but if you want to tumble-dry them, use a cool air setting.
If the garment needs ironing, do it inside-out, preferably between two pieces of cloth. You shouldn’t wet embroidery before ironing or use a steam iron.
Embroidered hats and backpacks
Embroidered hats and backpacks can be wiped clean with a damp cloth in the spots where it’s needed. If necessary, hats can be hand-washed cold. Don’t use brushes.
Both hats and backpacks can’t be machine-washed, bleached, tumble-dried, ironed, and dry-cleaned. Read the manufacturer label carefully for any other instructions.
Embroidered aprons can be machine-washed at 86ºF (30ºC) or less. Don’t use bleach. They can be tumble-dried on a low cycle. Read the manufacturer label carefully for any other instructions.
All-over printed apparel and hats
All-over printed apparel can be machine-washed cold with like colors, without bleach. Don’t dry-clean or tumble-dry the apparel. You can iron it with a low heat setting.
All-over printed swimwear
You should only hand-wash the All-Over Print Recycled High-Waisted Bikini, Bikini Top, and Bikini Bottom. Don’t use bleach, don’t dry-clean, or tumble-dry them. You can iron the recycled bikinis with a low heat setting.
All-Over Print One-Piece, Bikini, Bikini Top, Bikini Bottom, Kids Swimsuit, and Youth Swimsuit have the same care instructions as all-over printed apparel—they can be machine-washed cold with like colors, without bleach. Don’t dry-clean or tumble-dry the swimwear. You can iron it with a low heat setting.
All-Over Print Face Masks
All-Over Print Face Masks can be machine-washed at 140ºF (60ºC) with like colors, without bleach. They can’t be dry-cleaned. You can tumble-dry the face masks on low heat and iron on a cool setting.
All-over print backpacks, fanny packs, and duffle bags need to be hand-washed without bleach. Don’t dry-clean or tumble-dry the bags. You can iron these bags with a low heat setting.
All-over print totes and drawstring bags can be machine-washed without bleach on a cold cycle. They can’t be tumble-dried or dry-cleaned. You can iron these bags with a low heat setting.
Pillows and pillow cases
Pillow cases can be machine-washed without bleach on a cold cycle. Don’t dry-clean or tumble-dry the pillow cases. You can iron them with a low heat setting.
The pillow inserts shouldn’t be washed, bleached, tumble-dried, ironed, or dry-cleaned.
Bean Bag Covers
The cover of the Bean Bag can be machine-washed on a cold cycle without bleach. Don’t dry-clean or tumble-dry the cover. You can iron it with a low heat setting.
Sublimation socks, blankets, towels, and laptop sleeves
Sublimation socks, blankets, towels, and laptop sleeves can be machine-washed cold with like colors at no more than 86ºF (30ºC). Don’t use bleach and don’t dry-clean. It’s best to hang-dry, but tumble-drying can be used on a low cycle if necessary.
Sublimation flip flops
Sublimation flip flops can be hand-washed in warm water with a mild neutral detergent.
Our White Glossy Mugs and White Ceramic Mugs with Color Inside are microwave and dishwasher safe, but the print and coating will last longer if you hand-wash them.
Matte Black and Glossy Black Magic Mugs, however, should only be hand-washed, and you can’t put them in a microwave. Note that they’re also prone to scratches, so be extra careful.
The same goes for our Enamel Mugs that should only be hand-washed. Also, you can’t heat liquids or food directly in the Enamel Mugs—it can damage their coating.
Posters and Canvas
To ensure that your posters and canvas last for a long time, don’t keep them in direct sunlight or outdoors. They can be gently dusted with a soft dry cloth or a feather duster.
To clean a phone case, remove the case from your phone. Add a little mild soap to water, and dampen a cloth or sponge with it. With the damp cloth, rub your case gently in circles. Let your case air-dry at room temperature.
Don’t clean your phone case with any alcohol-based products as they can remove the ink and discolor the case.
Don’t wear the jewelry while showering, swimming, washing dishes, applying perfume or doing sports. When not wearing it, store it in the box you received it in.
After wearing the jewelry, we recommend wiping it with a non-abrasive jewelry polishing cloth to remove dirt and tarnish. But to fully remove tarnish and any stains on the jewelry, use silver or jewelry polish. Follow the instructions on the bottle carefully and use gloves when working with silver polish.
Free Shipping for orders above €24,99
Usually, it takes 3–7 days to fulfill an order, after which it’s shipped out. The shipping time depends on your location, but can be estimated as follows:
Europe: 6–8 business days
USA: 3–4 business days
International: 10–20 business days
Each product is made using the made-to-order production approach, fulfilling only the items our customers actually want. We do not hold any inventory in advance. This help us make our production process more sustainable. We know that sustainability is important: for our customers, our team, and of course, the planet.